Product Description
High Pressure CO2 Compressor with Good Quality for Sale
Introduction Oxygen Compressor
High Pressure CO2 Compressor refers to the compressor used to pressurize oxygen and achieve delivery.
Oxygen is a violent accelerant, prone to combustion and explosion.
Attention should be paid to the design and use of High Pressure CO2 Compressor:
| (1) | Compressed gas parts are strictly forbidden to contact with oil, the cylinder is not lubricated with water and glycerin or oil-free lubrication, and the oil is not stained when maintenance and the solvent must be cleaned and dried before assembly. |
| (2) | Because of the high humidity during water lubrication and the rising temperature during compression, the oxygen from the wet gas holder is corrosive, so the material in contact with oxygen should be corrosion-resistant, and requires good heat and electrical conductivity. The cylinder is generally made of phosphor bronze, the piston is made of aluminum alloy, and the intercooler is made of copper tube or stainless steel tube. |
| (3) | The average speed of the piston should be low, and the gas velocity in the pipeline should also be lower than that in the air compressor. |
| (4) | The exhaust temperature should not be too high, not higher than 100~120ºC when lubricated with water, and not higher than 160ºC when filled with oil-free lubrication structure. The pressure ratio at each level should not be too high. |
Product Specification
| No. | Item | Data |
| 1 | Working medium | Oxygen |
| 2 | Model | GOW-30/4-200 |
| 3 | Structure | oil free reciprocating |
| 4 | Pressure stage | 4 stage |
| 5 | Capacity | 30Nm3 |
| 6 | Inlet pressure | 3~4bar |
| 7 | Outlet pressure | 200bar |
| 8 | Cooling way | Water / Air |
| 9 | Motor power | 13.5kw |
| 10 | Motor power | Overload, stop automatic |
| 11 | External dimension | 1650*950*1470mm |
| 12 | Weight | 960kg |
Advantage Oxygen Compressor
Cape-Golden’s High Pressure CO2 Compressor is the preferred machine for pollution-free sealed oxygen compression. Our High Pressure CO2 Compressor is with high quality and reliable performance, reducing maintenance costs and extending service interval cycles. CZPT customers have reported up to 40,000 hours of use without having to replace any parts.
To compress oxygen, fluorine, and other highly reactive gases, CZPT follows rigorous cleaning procedures in a clean, dust-free environment.
We offer many different types of High Pressure CO2 Compressor, ranging from basic machine to turnkey engineering, slide mounting and computer control systems.
With our extensive experience in compressor technology and our state-of-the-art engineering and manufacturing capabilities, we work closely with our customers to provide them with the best solutions for their oxygen compression needs.
Typical Applications
Typical applications of High Pressure CO2 Compressor include but are not limited to the following:
1. Fill and unload oxygen from long tube trailer
2. Cylinder filled compressors with oxygen and bulk storage tanks
3. Used for oxygen stirring, recovery and mixing
4. Oxygen used for cutting and welding metal
5. Oxygen feedstock for chemical, petrochemical and pharmaceutical industries
6. Oxygen used in glass manufacturing and pulp and paper industry
7. Oxygen used in metal refining and oxidation processes in the chemical industry
8. Oxygen is supercharged and stored by high pressure compression
9. Oxygen for diving and medical care services
How to Choose the Right Air Compressor
An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
Electric motor
While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
Oil bath
Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.
Start/stop control
An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
Variable speed drive
A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.
